C Z Purlin Rolling Machine As roll forming technology advances, there are automatic quick-change C and Z steel purlin roll forming machine. in fact, the purlin machine is quick to change roll forming machines for producing z shape steel.

indeed, Automatic Interchangeable purlin roll forming machine also can be called PLC automatic purlin making machine, one roll forming machine can produce the steel c purlin, flange dimension and lip dimension.

C Z Purlin Rolling Machine

It is the practice in the steel industry that structural shapes are assigned representative designations for convenient shorthand description on drawings and documentation: Channel sections, with or without flange stiffeners, are usually referenced as C shapes. Channel sections without flange stiffeners also reference as U shapes. In steel building construction, secondary members such as purlins (roof) and girts (wall) are frequently cold-formed steel C, Z or U sections, C sections, and G purlin. LOTOS can produce Z and C and G Purlin machine ,also Purlin Roll Forming Machine in a variety of sizes with very precise punching options.

C Z Purlin Rolling Machine

Production Working Flow

Manual decoiler →7-roller leveling→ feeding→ puncher unit→ pre-cutting die→  roll forming machine→output table

The Main Purpose and Characteristics

in truth, This Fully automatic purlin making machine uses the same set of equipment to produce all the specifications in the C and Z Galvanised Steel Purlins plate type drawing, and the C specification conversion is completely automatic, and the operation is convenient and fast. Specifically, The structural design of the coaxial sliding sleeve eliminates the old cantilever unilateral forming unit and solves the problems of the insufficient structural strength and speed difference, and deviation.moreover, The control system is completed by an industrial PLC and auxiliary electrical components, and a human-computer interaction interface. the production efficiency is high, the specification adjustment can be completed in a few seconds, and the control system automatically adjusts as long as the parameters are input on the display screen.

The cutting mold frame adopts the gantry type and is made into a whole. According to the length parameter of the input workpiece, after using the encoder to lengthen.

After the encoder is fixed in length, it will automatically stop and cut off.

(1) Cut mode: This machine adopts the front cut mode.

(2) The hydraulic shear type is adopted, and the workpiece is effectively cut to a width of 600 mm. Shear thickness: 1.5 mm.

(3) Scissors material: Cr12,and quenched. The quenching hardness is reached (HRC 58-62 degrees).

(4) Install the material guide plate and the discharge plate before and after the shearing, structure to ensure smooth material in and out.