Cautions for installation of color steel tile

Cautions for installation of color steel tile

1. After the color steel tiles are pressed at the construction site, they must be stacked in categories and covered with rain cloth. If the rain is heavy and damp, you must separate the tiles immediately, wipe off the surface moisture with a dry cloth, and then stack the tiles to keep the air circulating to make the surface dry.

2. In order to shorten the construction period, use the pole and rope method to hoist the colored steel tiles into the roof at one time, and then divide the labor manually. Special attention must be paid to when carrying color steel tiles, dry and clean gloves must be used. Do not drag steel plates and other things on the surface of the color steel tiles; workers on the roof must wear soft rubber shoes and clean up silt and dirt before going to the house; when walking along the longitudinal direction of the roof slab, walk in its trough. When walking along the trough, try to distribute the load evenly on the feet, not on the heels or toes.

3. During installation, self-tapping screw drilling, hand tapping, electric saw cutting or other operations will leave metal shavings on the roof or adjacent areas. These things must be removed from the roof, flooding board, gutter, etc. in time Clean, so as not to be oxidized by solid debris, causing stains on the surface of the color plate, causing damage to the plate surface.